![\"Pallet](\"https:\/\/www.speedrackwest.com\/wp-content\/uploads\/2025\/01\/Pallet-Rack-Back-Guard-3-1024x683.jpg\")
<\/figure>\n<\/div>\n\n\n\n![\"Pallet](\"https:\/\/www.speedrackwest.com\/wp-content\/uploads\/2025\/09\/Pallet-Rack-Back-Guard-4-1024x683.jpg\")
<\/figure>\n<\/div>\n<\/div>\n\n\n\nKey Features<\/h2>\n\n\n\n\n- Heavy-Duty Construction<\/strong> \u2013 Made from 1 1\/4″ x 1 1\/4″ gauge steel frame welded with a 2″ x 2″ x 10-gauge steel wire mesh, ensuring strength and durability.<\/li>\n\n\n\n
- Secure Mounting<\/strong> \u2013 Panels come with predrilled mounting holes (six-inch centers) for easy installation.<\/li>\n\n\n\n
- Flush or Offset Brackets<\/strong> \u2013 Choose between flush mount brackets or offset brackets (1 5\/8″ to 3 1\/4″ Offset Clips<\/a> or 4 3\/8″ to 6″ Offset Clips<\/a>) to accommodate overhanging pallets.<\/li>\n\n\n\n
- Stackable Panels<\/strong> \u2013 Designed to be stacked to the desired height, with additional kits available for protection extending above the rack.<\/li>\n\n\n\n
- Reinforced Wire Mesh<\/strong> \u2013 Flat steel stiffeners add extra rigidity, making this back guard a heavy-duty safety solution.<\/li>\n<\/ul>\n\n\n\n
Specifications<\/h2>\n\n\n\n\n- Panel Sizes:<\/strong> Standard sizes available in 4′ or 5′ height, with widths matching beam lengths for complete coverage.<\/li>\n\n\n\n
- Attachment Points:<\/strong> Each panel has seven attachment points for secure fastening.<\/li>\n\n\n\n
- Hardware:<\/strong> Uses standard 3\/8″ assembly hardware.<\/li>\n<\/ul>\n\n\n\n
Installation & Compatibility<\/h2>\n\n\n\n\n- Easy Installation<\/strong> \u2013 An angled frame design provides a clear installation path, making setup faster and more efficient.<\/li>\n\n\n\n
- Versatile Application<\/strong> \u2013 Can be installed at any level on your rack or mounted directly to support posts if needed.<\/li>\n\n\n\n
- Custom Options Available<\/strong> \u2013 Contact us for custom panel sizes to fit your specific storage requirements.<\/li>\n<\/ul>\n\n\n\n
Walkways and the top of the rack:<\/h2>\n\n\n\n
Clear walkways means that you and your employees are protected from tripping hazards. You are also protected against the dangers of falling products from, potentially, high places. They are sturdy and they can stack on top of each other to reach the top of your rack. They can even go above your rack, if necessary, with a kit that allows that kind of action. Please note that the kit is an extra piece and you will have to contact us to get it for your rack. You can contact us by calling us at 503-640-5666<\/strong><\/a>. The pallet rack wire mesh back panels you see here will increase how safe you and your workers will feel around your pallet racks.<\/p>\n\n\n\nPallet Back Guard Offset Clips<\/h2>\n\n\n\n
These offset clips allow your pallets to overhang the pallet rack beam. There are two choices for this if that is something that you are interested in having.<\/p>\n\n\n\n
\n\n![\"Pallet](\"https:\/\/www.speedrackwest.com\/wp-content\/uploads\/2025\/01\/Rack-Back-Guard-Offset-Clip-Temp0017-1024x683.jpg\")
<\/figure>\n<\/div>\n\n\n\n\n![\"Offset](\"https:\/\/www.speedrackwest.com\/wp-content\/uploads\/2025\/05\/Offset-Clip-1024x683.png\")
<\/figure>\n<\/div>\n<\/div>\n\n\n\nAvailable Options<\/strong>:<\/p>\n\n\n\n\n- 1 5\/8\u2033 to 3 1\/4\u2033<\/strong><\/li>\n\n\n\n
- 4 3\/8\u2033 to 6\u2033<\/strong><\/li>\n<\/ul>\n\n\n\n
Both offset clips attach the wire mesh back guard panel to your pallet rack frame \u2013 the only difference is how far they hold the panel off the rack<\/strong>:<\/p>\n\n\n\n\n- The small offset clip<\/strong> holds the panel about 1 5\/8″ to 3 1\/4″<\/strong> away from the rack.<\/li>\n\n\n\n
- The large offset clip<\/strong> holds the panel about 4 3\/8″ to 6″<\/strong> away from the rack.<\/li>\n<\/ul>\n\n\n\n
Choose the size based on how much clearance you need between the back of your pallet loads and the mesh back guard.<\/p>\n\n\n\n
What do the offset ranges (1 5\/8″\u20133 1\/4″ and 4 3\/8″\u20136″) mean?<\/strong><\/p>\n\n\n\nThese numbers are the distance from the front face of your upright to the wire mesh back guard panel.<\/p>\n\n\n\n
Specifications<\/h2>\n\n\n\n\n- Panel Sizes:<\/strong> Standard sizes available in 4′ or 5′ height, with widths matching beam lengths for complete coverage.<\/li>\n\n\n\n
- Attachment Points:<\/strong> Each panel has seven attachment points for secure fastening.<\/li>\n\n\n\n
- Hardware:<\/strong> Uses standard 3\/8″ assembly hardware.<\/li>\n<\/ul>\n\n\n\n
Installation & Compatibility<\/h2>\n\n\n\n\n- Easy Installation<\/strong> \u2013 An angled frame design provides a clear installation path, making setup faster and more efficient.<\/li>\n\n\n\n
- Versatile Application<\/strong> \u2013 Can be installed at any level on your rack or mounted directly to support posts if needed.<\/li>\n\n\n\n
- Custom Options Available<\/strong> \u2013 Contact us for custom panel sizes to fit your specific storage requirements.<\/li>\n<\/ul>\n\n\n\n
Walkways and the top of the rack:<\/h2>\n\n\n\n
Clear walkways means that you and your employees are protected from tripping hazards. You are also protected against the dangers of falling products from, potentially, high places. They are sturdy and they can stack on top of each other to reach the top of your rack. They can even go above your rack, if necessary, with a kit that allows that kind of action. Please note that the kit is an extra piece and you will have to contact us to get it for your rack. You can contact us by calling us at 503-640-5666<\/strong><\/a>. The pallet rack wire mesh back panels you see here will increase how safe you and your workers will feel around your pallet racks.<\/p>\n\n\n\nPallet Back Guard Offset Clips<\/h2>\n\n\n\n
These offset clips allow your pallets to overhang the pallet rack beam. There are two choices for this if that is something that you are interested in having.<\/p>\n\n\n\n
\n\n<\/figure>\n<\/div>\n\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n\n\nAvailable Options<\/strong>:<\/p>\n\n\n\n\n- 1 5\/8\u2033 to 3 1\/4\u2033<\/strong><\/li>\n\n\n\n
- 4 3\/8\u2033 to 6\u2033<\/strong><\/li>\n<\/ul>\n\n\n\n
Both offset clips attach the wire mesh back guard panel to your pallet rack frame \u2013 the only difference is how far they hold the panel off the rack<\/strong>:<\/p>\n\n\n\n\n- The small offset clip<\/strong> holds the panel about 1 5\/8″ to 3 1\/4″<\/strong> away from the rack.<\/li>\n\n\n\n
- The large offset clip<\/strong> holds the panel about 4 3\/8″ to 6″<\/strong> away from the rack.<\/li>\n<\/ul>\n\n\n\n
Choose the size based on how much clearance you need between the back of your pallet loads and the mesh back guard.<\/p>\n\n\n\n
What do the offset ranges (1 5\/8″\u20133 1\/4″ and 4 3\/8″\u20136″) mean?<\/strong><\/p>\n\n\n\nThese numbers are the distance from the front face of your upright to the wire mesh back guard panel.<\/p>\n\n\n\n
Installation & Compatibility<\/h2>\n\n\n\n\n- Easy Installation<\/strong> \u2013 An angled frame design provides a clear installation path, making setup faster and more efficient.<\/li>\n\n\n\n
- Versatile Application<\/strong> \u2013 Can be installed at any level on your rack or mounted directly to support posts if needed.<\/li>\n\n\n\n
- Custom Options Available<\/strong> \u2013 Contact us for custom panel sizes to fit your specific storage requirements.<\/li>\n<\/ul>\n\n\n\n
Walkways and the top of the rack:<\/h2>\n\n\n\n
Clear walkways means that you and your employees are protected from tripping hazards. You are also protected against the dangers of falling products from, potentially, high places. They are sturdy and they can stack on top of each other to reach the top of your rack. They can even go above your rack, if necessary, with a kit that allows that kind of action. Please note that the kit is an extra piece and you will have to contact us to get it for your rack. You can contact us by calling us at 503-640-5666<\/strong><\/a>. The pallet rack wire mesh back panels you see here will increase how safe you and your workers will feel around your pallet racks.<\/p>\n\n\n\nPallet Back Guard Offset Clips<\/h2>\n\n\n\n
These offset clips allow your pallets to overhang the pallet rack beam. There are two choices for this if that is something that you are interested in having.<\/p>\n\n\n\n
\n\n<\/figure>\n<\/div>\n\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n\n\nAvailable Options<\/strong>:<\/p>\n\n\n\n\n- 1 5\/8\u2033 to 3 1\/4\u2033<\/strong><\/li>\n\n\n\n
- 4 3\/8\u2033 to 6\u2033<\/strong><\/li>\n<\/ul>\n\n\n\n
Both offset clips attach the wire mesh back guard panel to your pallet rack frame \u2013 the only difference is how far they hold the panel off the rack<\/strong>:<\/p>\n\n\n\n\n- The small offset clip<\/strong> holds the panel about 1 5\/8″ to 3 1\/4″<\/strong> away from the rack.<\/li>\n\n\n\n
- The large offset clip<\/strong> holds the panel about 4 3\/8″ to 6″<\/strong> away from the rack.<\/li>\n<\/ul>\n\n\n\n
Choose the size based on how much clearance you need between the back of your pallet loads and the mesh back guard.<\/p>\n\n\n\n
What do the offset ranges (1 5\/8″\u20133 1\/4″ and 4 3\/8″\u20136″) mean?<\/strong><\/p>\n\n\n\nThese numbers are the distance from the front face of your upright to the wire mesh back guard panel.<\/p>\n\n\n\n
Walkways and the top of the rack:<\/h2>\n\n\n\n
Clear walkways means that you and your employees are protected from tripping hazards. You are also protected against the dangers of falling products from, potentially, high places. They are sturdy and they can stack on top of each other to reach the top of your rack. They can even go above your rack, if necessary, with a kit that allows that kind of action. Please note that the kit is an extra piece and you will have to contact us to get it for your rack. You can contact us by calling us at 503-640-5666<\/strong><\/a>. The pallet rack wire mesh back panels you see here will increase how safe you and your workers will feel around your pallet racks.<\/p>\n\n\n\n These offset clips allow your pallets to overhang the pallet rack beam. There are two choices for this if that is something that you are interested in having.<\/p>\n\n\n\n Available Options<\/strong>:<\/p>\n\n\n\n Both offset clips attach the wire mesh back guard panel to your pallet rack frame \u2013 the only difference is how far they hold the panel off the rack<\/strong>:<\/p>\n\n\n\n Choose the size based on how much clearance you need between the back of your pallet loads and the mesh back guard.<\/p>\n\n\n\n What do the offset ranges (1 5\/8″\u20133 1\/4″ and 4 3\/8″\u20136″) mean?<\/strong><\/p>\n\n\n\n These numbers are the distance from the front face of your upright to the wire mesh back guard panel.<\/p>\n\n\n\nPallet Back Guard Offset Clips<\/h2>\n\n\n\n
<\/figure>\n<\/div>\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n\n\n\n
\n